[CPMD-list] Compilation on NEC-SX

[Ari P Seitsonen]

Dear Frédéric,

  Which C pre-processor did you use? Do you compile on a NEC itself or
cross-compiling on a front-end? Could you please send me the source code
'control_pri.f' (at least a couple of lines around the line 631?

    Greetings,

       apsi

-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-
 Ari Paavo Seitsonen / Ari.P.Seitsonen at iki.fi / http://www.iki.fi/~apsi/
 Tel +41 1 635 44 97 / Fax +41 1 635 68 38 / GSM +41 79 719 09 35      
 Anschrift: Physikalisch Chemisches Institut (PCI), Universität Zürich (UniZh)
 Indirizzo: Winterthurerstraße 190, CH-8057 Zürich
 Address:   Schweiz / Svizzera / Suisse / Svizra / Switzerland

On Tue, 13 Apr 2004, BOUYER Fr?d?ric 153746 wrote:

> Dear All,
>  
> After compiling the code (v3.7.2) on my Linux machine, I would like to
> perform a compilation (same version) on our NEC-SX machine. I have read the
> README_NEC_SX.txt file step by step, but in final I got the following
> message (see below).
>  
> Could anyone help me ?
>  
> I use the NEC-SX5-MPI configuration parameter, but I got the same message
> with either SX4, SX5, nor SX5-MPI flag (and applying the sed command to
> generate after all the Makefile_opt).
>  
> Regards,
>  
> Frédéric
>  
> rm -f control_pri.f
> /usr/bin/cpp -P -D__NEC -USX -DFFT_DEFAULT -DLAPACK -D__VECTOR
> ./control_pri.F
>  ./control_pri.f
> sxf90 -clear -c -sx4 -ew -float0 -f0 -Pstatic -V -R5 -Cvopt -pi expin=util.f
> -I
> /sx5/usr/include -Wf"-pvctl noassume loopcnt=99999999 fullmsg vr256
> vwork=static
>  vworksz=4M novlchk noverrchk"  ./control_pri.f -o  ./control_pri.o
> FORTRAN90/SX Version 2.0 for SX-4
> f90 driver for SX       (c) 1995,2003 NEC Corporation
>         Rev.285 2003/09/25
> ./control_pri.f:
> f90 compiler for SX     (c) 1995,2003 NEC Corporation
>         Rev.285 2003/09/25
>  
> f90: warn(85): envj.inc, line 13: In block "envj",proper alignment occurred
>                                   because of align option.
> f90: warn(85): envj.inc, line 13: In block "envj",proper alignment occurred
>                                   because of align option.
> f90: warn(85): shop.inc, line 2: In block "sh00",proper alignment occurred
>                                  because of align option.
> f90: error(110): control_pri.f, line 631:
>                                        Extra text follows the end of
> statement.
> f90: warn(82): control_pri.f, line 712:
>                                        Name "betas" is not used.
> f90: control_pri.f, control_pri: There are 1 error and 4 warnings.
>  
> f90: warn(6): control_pri.f, line 713: Only comment lines in program.
> f90: control_pri.f, : There is 1 warning.
> sxf90 fatal : /SX/usr/lib/f90com command error : 1
> gmake: *** [control_pri.o] Error 1
>  
>  
>